Everything you need to repair your concrete

We Give You The Knowledge To Be Successful

Saves you thousands in the long run

What if you could say goodbye to the days where you need to break the bank to get a finishing job on your concrete?

 

Well, with the right products and right knowledge, you could save literally thousands of dollars.

 

So we set out to educate and provide the tools you need to make that floor look like you want it to.

 

With the Concrete Quick Repair System, you pick what you need for your specific project, order exactly the right quantity of exactly the right product you need and then get step by step instructions on how to apply it.

 

Contractors, business owners, homeowners, whoever you are, you’ll get a straightforward way to get the job done.

These are the products you can apply to repair your concrete.

Instant Medic Hard offers a pro grade product in an easy to use formulation.  Great for quick turn projects where a quick, rock hard repair is needed.

 

Mix 1:1. See “Coverage” tab for coverage information.

Instant Medic Color Packs are mixed in with Instant Medic Hard to give a base color in when you mix in the Instant Medic Hard to get the effect that you want.

 

Use Instant Medic coverage area for idea of how much area coverage your color pack needs.

concrete polishing pads kansas city

Concrete DNA Satellite Pads are effective at getting the crack repair you have done back to the polished sheen the rest of the floor looks like.

Luckily, we provide the package pre-built with the grits you will need to get the CSP necessary for your polish job.

Use the instructions below, step by step, and you’ll have the repair you want in no time.

 

Step 1:

  • Prep the are to be repaired
    1. Remove any loose concrete materials from the repair area
    2. Clean the area with a Nyalox brush or wire wheel and vacuum free of dust.

 

Step 2:

  • Mix Instant Medic Hard equal parts; 1A:1B
    1. Pigments such as our Polish Dyes, or our Indoor/Outdoor “Instant Gratification Dye” can be added to the “B” side prior to mixing to pigment the product; only solvent based dye products.
    2. Sand can be added for strength and volume. 3-Parts sand to one part mixed Instant Medic Hard will make a trowelable; slightly runny mix. It is not suggested to mix too much sand.
    3. Other “dry” products such as portland, tile grout, etc can be added for color and texture.
  • Only mix small batches of Instant Medic Hard at one time; start off with no more than 8 oz in total. This product dries very quickly.

 

Step 3:

  • Pour the mixed product into the repair area
    1. Allow to slightly overfill
    2. If pouring into a crack, keep shoving more product into the top of the crack until it stops sinking into the crack cavity.

 

Step 4:

  • Clean excess product
    1. Clean overfilled product with a Concrete DNA Satellite Pad; 30 or 50-Grit works the best.
    2. A flap disc; available at most any hardware store on an angle grinder is also good at removing excess product.

 

Note: Instant Medic Hard does not like Moisture. The surface itself and the products added to it; sand, polishing dust must be bone dry. It is not recommended to use playground sand (sand from plastic bags)

In addition to the step by step instructions, use the videos below to make sure you get the finish you want the first time you go through.

What it looks like after it gets hard

So easy a 7 year old can do it

Instant Medic Flex Coverage

Narrow Joints & Cracks Coverage

 

This table is built off linear feet (lf)

1/8 x 3/4″ = 200 lf/gallon 3/16 x 3/4″ = 135 lf/gallon 1/4 x 3/4″ = 100 lf/gallon
1/8 x 1″ = 150 lf/gallon 3/16 x 1″ = 100 lf/gallon 1/4 x 1″ = 80 lf/gallon
1/8 x 1-1/4″ = 125 lf/gallon 3/16 x 1-1/4″ = 85 lf/gallon 1/4 x 1-1/4″ = 60 lf/gallon
1/8 x 1-1/2″ = 100 lf/gallon 3/16 x 1-1/2″ = 70 lf/gallon 1/4 x 1-1/2″ = 50 lf/gallon
1/8 x 1-3/4″ = 85 lf/gallon 3/16 x 1-3/4″ = 60 lf/gallon 1/4 x 1-3/4″ = 45 lf/gallon
1/8 x 2″ = 75 lf/gallon 3/16 x 2″ = 50 lf/gallon 1/4 x 2″ = 40 lf/gallon

Narrow Joints & Cracks Coverage

 

This table is built off linear feet (lf)

3/8 x 3/8″ = 135 lf/gallon 3/4 x 1/2″ = 50 lf/gallon 1 x 3/4″ = 25 lf/gallon
3/8 x 1/2″ = 100 lf/gallon 3/4 x 3/4″ = 35 lf/gallon 1 x 1″ = 20 lf/gallon
1/2 x 1/2″ = 80 lf/gallon 1 x 1/2″ = 40 lf/gallon 1 x 2″ = 10 lf/gallon

Concrete Quick Repair System

Concrete finishing jobs are relative to the job, and no two jobs are the same! Use the information provided above to select the products you need, then select “Add To Cart” and get everything you need for a Quick Repair job shipped to your front door.

Instant Medic – Hard

$95.00$187.00

Clear
SKU: CFS-INSTANT MEDIC HARD Categories: ,

Instant Medic – Hard Color Pack

$13.00

Clear
SKU: CFS-INSTANT MEDIC HARD COLOR PACK Category:

Concrete DNA™ Diamond Satellite Pads

$66.15$136.50

Clear
  • Makes polishing concrete super easy and FAST!
  • Many use our 30 grit for prepping a floor for stain and seals or before applying a coating

Check out Concrete Surface Profiles to see what grit you need to get your job done.