PolyBase 98 Color Pigment
- Data Sheets
PolyBase Color Pigment is a high solids, concentrated, solvent based tint system specially formulated for PolyBase 98. PolyBase Color Pigment is formulated with high quality, ultra fine particle pigments that easily disperses into PolyBase 98. PolyBase Color Pigment are a superior choice to obtain a solid opaque colored finish in PolyBase 98.
PLEASE NOTE: PolyBase Color Pigment is designed ONLY to be used in PolyBase 98 and is to only be used as a base coat/prime coat
For full broadcast chip systems, mix 32oz in TWO GALLONS of Resin B for 60 seconds using a mechanically paint mixer prior to application. Allow any foam to settle prior to use. Material may separate during long term storage. Remix as needed. Then mix the colored Part B with ONE GALLON of Part B for another 60 seconds.
CAUTION: Do not add too much color. Apply a test area prior to job application for desired appearance. Over pigmentation may cause color float or streaking, especially in the darker colors. Do not allow to puddle.