Hot Strip is a high impact, emulsifiable, coating remover for use on concrete floors, paving blacks, etc. To quickly remove sealers. It can be used indoors or outdoors, wherever water can be used to flush off sealer.
|Buy 8+ for $38.25 each for a total savings of 15%|
|Buy 24+ for $33.75 each for a total savings of 25%|
|Buy 48+ for $29.25 each for a total savings of 35%|
Turn off all pilot lights, flames or any arcing or sparking devices. NO SMOKING!!!
- Apply Hot Strip by spraying, brushing or pouring on and spreading evenly with a squeegee. Apply at approximately one gallon per 150 sq.ft.
- Allow Hot Strip to penetrate and soften the coating for at least 20 to 30 minutes.
- Add a small amount of water and scrub vigorously to emulsify the liquefied coating.
- Heavy coatings may require a power scrubbing or a second treatment.
- Flush off the emulsified coat, rinse and mop or wet vac. 6. Once dry the floor is ready for any desired treatment.
|Dimensions||6 x 6 x 13 in|
Only logged in customers who have purchased this product may leave a review.