U PREP IT ™- INTERIOR PREP KIT

Concrete Floor Supply's interior prep kit is one that should be used prior to sealing or epoxy coatings. The prep method is for when there are no prior coatings, glues or paints on the floor. 

Step 1:

  • Completely Wet the floor with water.
  • Liberally spray Super Blue on the floor with a pump sprayer.
  • Run the Concrete DNA™ Diamond Satellite Pad (30 Grit) on the floor using a low speed buffer, propane burnisher or auto scrubber.
  • Squeegee and wet vac dirty water from the floor before it dries.
    • Your floor should have a "chalkboard" appearance and have a slight scratch in it that will help your sealer or coating to bond.

  • FLOOR COMPLETION AFTER STEP 1

    0%

Step 2:

  • Run the red pad with plenty of water mixed with the diluted Ez Clean to clean and lift any remaining dirt from the floor.
  • Squeegee and Vac the dirty water from the floor before it dries.
    • Let your floor dry the necessary amount of time before applying your sealer or coating.

Way 1

Way 2

  • U PREP IT ™- INTERIOR PREP SYSTEM

    0%

Uses

Basements

Garage Floors

Highlights

Easy to Use

Cost Efficient

Gets concrete clean and open to accept sealers or epoxy coatings

Instructions

Product Sheets

Super Blue

Ez Clean