water-based acrylic concrete coating

Aqua Klear Koat

$49.00

In stock (can be backordered)

Actual Area (sq. ft.) 300
$49.00

Aqua Klear Koat is a non-flammable water based acrylic sealer for use on concrete floors, walls, countertops, etc. where use of flammable solvent based sealers is not practical.  Gloss of a solvent based sealer!  Quick drying. Our ‘go to’ sealer for stained concrete floors. Also a great sealer for plain concrete floors that you want to give them a fresh ‘wet’ look.

Buy 8+ for $44.10 each for a total savings of 10%
DATA SHEETS
COVERAGE RATES 300-400 square feet per gallon for each coat
TYPE Stable water dispersed polymer coating
ODOR Mild
TOXICITY Low, harmful if swallowed
VOCS Less than 100 gm per L
FLAMMABILITY Non-flammable
COMPOSITION Special proprietary resins in a solvent solution in water

Before applying Aqua Klear Koat the floor must be clean and free of oil, dirt and chemical residue. Acid stained floors must be rinsed thoroughly to be free of any naturalizing chemicals and dry before sealing.

  1. To the clean dry floor apply Aqua Klear Koat by brush, roller, pump up sprayer or lambs wool applicator. Apply two thin coats at the rate of 300-400 Sq.Ft per gallon for each coat.
  2. Allow the first coat to dry for one hour and apply the second coat.
  3. Allow to dry for 48 hours before applying water or Ez-Glo
  4. Wash brushes and equipment with warm water and soap; rinse clean.

Additional information

Weight 10 lbs
Dimensions 6 x 6 x 13 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.