The Concrete Floor Supply Clear Coat System is a water clear coating system for those wanting a durable, ‘wet look’ floor. This system is a clear 100 percent solids epoxy system that is self leveling and gives the floor a smooth water like finish. Our Clear Coat System is a high performance floor for a variety of uses. It is a high wear, chemical resistant system for use in commercial, industrial and residential settings where an easy to clean, seamless, low maintenance floor finish is desired.

Step 1:

One of the key components is to ensure that the surface is free from sealers, dirt, oils, glues and other contaminants.

  • Use one of our Concrete DNA Satellite Pads; 30 Grit.
    • Run pad fully wet
    • Utilize a 1:9 ration of Super Blue to Water
    • Squeegee and remove water from floor before it is allowed to dry. Leave floor clean any dust prints or contaminates.
      • Note:
        • When using water to prep allow the floor to dry a minimum of 24-Hour before applying the coating.
        • We have strippers for glues and paints if present during prep.

  • FLOOR COMPLETION AFTER STEP 1

    0%

Step 2:

  • After floor has sufficiently dried. Apply a coat of Epoxy M.V.B.
    • Squeegee onto the floor using a 1/8th notched squeegee
      • Walk though product with spiked shoes
    • Use a 3/8″ Nap roller to backroll product
    • Allow to dry until tack free and within the recoat window. If product has been down for more than 24-Hours it will need to be screened before recoating.

  • FLOOR COMPLETION AFTER STEP 2

    0%

Step 3:

  • Apply a coat of Epoxy Flow 100
    • Squeegee onto the floor using a 1/8th notched squeegee.
      • Walk through product in spike shoes
    • Use a 3/8th Nap roller to backroll the product
      • Ez-Grip can be added to this coat for additional traction.

  • U EPOXY IT ™- EPOXY CLEAR SYSTEM COMPLETE

    0%

Uses

Lofts
Retail spaces
and other places where a clear durable finish over concrete is desired

Highlights

100% solids epoxy
Self levels on the floor
Very low odor and VOC compliant
Outwears the typical painted floor many many times over
Good chemical and abrasion resistance
Easy to Clean and Maintain…it’s a seamless floor
Gloss, Smooth finish (matte finish also available)
Easy application steps
Application kits available

Instructions

Product Sheets

Super Blue

Epoxy Flow 100

M.V.B.


BUY NOW