Protect your concrete floor from liquids and the damage that oils and salts can cause over time.
Step 1:
- Prepare the floor with a Concrete DNA double sided pad; 400 Grit.
- Run the pad with plenty of water under a low-speed floor machine.
- Add a dilution of Citra Pro to help clean the concrete.
- Other cleaners and strippers are available for other situations such as glues and paints.
- Add a dilution of Citra Pro to help clean the concrete.
- Squeegee water and remove from floor with a wet/dry vac
- Insure the floor is clean of dust and footprints by lightly mopping.
- Let the floor dry
- Run the pad with plenty of water under a low-speed floor machine.
-
FLOOR COMPLETION AFTER STEP 1
0%
Step 2:
- Seal the floor with Concrete Floor Supply Ez-Shield
- Ez Shield can be applied with a microfiber flat mop
- Sufficiently saturate the floor with Ez Shield. Don’t allow to puddle for more than 20-minutes.
- Allow floor to sufficiently dry before use; typically 24-Hour for light traffic
-
FLOOR COMPLETION AFTER STEP 2
0%
Step 3:
- Utilize Ez-Clean for ongoing maintenance
-
U SEAL IT ™- LIQUID PROTECTION SYSTEM
0%