Water Based Color Pigment
- pigment for Super Prime
- pigment for WB Urethane Gloss
- Additional Information
Water based color pigment for Super Prime (formerly S&P 40), and Water Based Urethane Gloss. One pigment container can pigment 2.5 gallons worth of product.
PLEASE NOTE: It is always recommended to test the product in a small area on the same concrete substrate for desired results prior to coating the entire floor. Usage and coverage rates may vary for all coatings and substrates depending on porosity, density, texture etc.
MIXING: Mix one quart of S&P 40WB Color pack in one gallon of Resin (A) for 60 seconds using a squirrel mixer prior to application. Allow any foam to settle prior to use. Material may separate during long-term storage. Remix as needed. Then mix the colored Part A with the appropriate amount of Part (B) for another 60 seconds.
CAUTION: Do not add too much color. Apply a test area prior to job application for desired appearance. Over pigmentation may cause color float or streaking, especially in the darker colors. Do not allow to puddle. The average usage is one quart per two gallons. For lighter colors it may take more, darker colors may take less depending on the application.
|8 × 8 × 8 in